Argus Heating

Flexible Silicone Drum Heaters

Applications:

  • viscous fluid
  • grease
  • fats
  • paints
  • chemicals
  • ink
  • fruit concentrates
  • adhesives
 

Argus Heating design, manufacture, and distribute a range of Flexible Silicone Drum Heaters suitable for use on 200 litre metal or plastic drums and 60 and 20 litre drums and pails. Flexible Silicone Drum Heaters are specifically designed to reduce the viscosity of products or melt solids to a pourable temperature. These can be used with other Argus Heating products: a Drum Insulated Jacket for greater heating efficiency and/or a Drum Base Heater where the drum and product will accept additional heat.

Features

  • Tough
  • Long-lasting
  • Resistant to oil and chemicals
  • Provide rapid heat-up due to direct contact with the drum
  • Fitted with a pre-set thermostat set at 32°C, 42°C or 52°C
  • Additional over-temperature thermostat for safety
  • Tested in accordance with AS/NZS3760-2010+A2

Construction

  • Made from high-quality fibreglass reinforced silicone sheeting
  • Fitted with a 2m Power Cord and 3-pin plug
  • Standard with eyelets and lacing rope
  • Over-spring toggles option available for the 200L metal drum model
 
Drum Size (L)

Stock Code

Length (mm) Width (mm) Voltage (V) Wattage (W) Thermostat (°C)  
20 (Metal or Plastic) S346200A 870 150 230 200 32
60 (Metal or Plastic) S4610440A 1174 250 230 440 32
200 (Metal or Plastic) S7112900 1800 300 230 900 42
200 (Metal only) S71101300E 1750 250 230 1300 52
200 (Metal only) w/spring toggles S71101300 1800 250 230 1300 52

 

Photos[ click on the thumbnails below to view large images ]

Range of Flexible Silicone Drum Heaters Flexible Silicone Drum Heaters with Eyelets Flexible Silicone Drum Heaters with Over-Spring Toggles


 
 
This page was last modified on: 20 Sep 2016 00:27:58