Our Tubular Heaters will be discontinued due to electrical compliance. Final orders will be accepted until 31st March 2025, subject to demand and material availability. All units must be sold to end users before the 16th June 2025. We are actively developing an alternative solution so keep an eye on the website for future updates.

Circulation Heaters

Circulation heaters heat liquids or gases as they pass through the heater.  These high-quality, self-contained heaters are designed for optimum heating performance and efficiency.

Argus Heating can custom design circulation heaters to suit your specific requirements.

Features and benefits

  • Circulation heaters can be mounted vertically or horizontally. Two threaded mounting lugs are welded to the case to assist with mounting.
  • Suitable for use in aggressive and corrosive environments.
  • Heating elements are easily removed and replaced.
  • Argus Heating can provide temperature control systems customised to suit your needs.

Construction

  • Sheath materials: Incoloy® 800, 316SS, 304SS, 321SS, copper.
  • Flange material: Incoloy® 800, 316SS, 304SS, low carbon steel.
  • Vessel material: SA53B or SA106B steel, suitable for operating temperatures up to 399 °C.
  • Stainless steel outer jacket for protection.
  • Terminal housing: general purpose (NEMA 1), moisture resistant (NEMA 4), explosion proof (NEMA 7).
  • Large range: 3” to 14” flanged immersion heating elements available with 150 lb. steel or 300 lb. SS flanges.
  • Wattage range: 3 kW to 375 kW, 3 pH supply.
  • Watt density range: 1.3 W/cm2 to 9.3 W/cm2.

Important Considerations

Argus Heating’s high quality circulation heaters are designed for optimum heating performance and efficiency.

Applications

Typically used for:

  • Heating caustic solutions such as CIP (clean in place) solutions.
  • Heating water to specific temperatures for a variety of applications.
  • Reducing the viscosity of degreasing oils and solutions.
  • Pre-heating different grades of oil for disposal.
  • Warming forced air and gases.

Product Brochure

Send Enquiry

Circulation Heaters

Product temporarily unavailable

Circulation heaters heat liquids or gases as they pass through the heater.  These high-quality, self-contained heaters are designed for optimum heating performance and efficiency.

Argus Heating can custom design circulation heaters to suit your specific requirements.

Features and benefits

  • Circulation heaters can be mounted vertically or horizontally. Two threaded mounting lugs are welded to the case to assist with mounting.
  • Suitable for use in aggressive and corrosive environments.
  • Heating elements are easily removed and replaced.
  • Argus Heating can provide temperature control systems customised to suit your needs.

Construction

  • Sheath materials: Incoloy® 800, 316SS, 304SS, 321SS, copper.
  • Flange material: Incoloy® 800, 316SS, 304SS, low carbon steel.
  • Vessel material: SA53B or SA106B steel, suitable for operating temperatures up to 399 °C.
  • Stainless steel outer jacket for protection.
  • Terminal housing: general purpose (NEMA 1), moisture resistant (NEMA 4), explosion proof (NEMA 7).
  • Large range: 3” to 14” flanged immersion heating elements available with 150 lb. steel or 300 lb. SS flanges.
  • Wattage range: 3 kW to 375 kW, 3 pH supply.
  • Watt density range: 1.3 W/cm2 to 9.3 W/cm2.

Applications

Typically used for:

  • Heating caustic solutions such as CIP (clean in place) solutions.
  • Heating water to specific temperatures for a variety of applications.
  • Reducing the viscosity of degreasing oils and solutions.
  • Pre-heating different grades of oil for disposal.
  • Warming forced air and gases.
Argus Heating’s high quality circulation heaters are designed for optimum heating performance and efficiency.

Product Brochure

Send Enquiry

Company
About UsContactTerms of TradePurchasing Terms
Products
Bulk Container HeatingHeat Cable and Resistance WireDrum HeatingIndustrial Heaters and ElementOEM Wholesale